Self-drilling stainless steel screws - 4.2 x 32mm - TX20

Stainless Steel AISI 304 Screws for Blendeq Cladding

These high-quality stainless steel AISI 304 screws are specifically designed for the installation of Blendeq cladding in the groove. Equipped with a square drive, the screws are supplied with the corresponding square bit, allowing you to get started immediately.

The Blendeq cladding planks feature a convenient tongue and groove connection, making installation quick and easy. For horizontal placement, planed hardwood battens with a minimum dimension of 27 x 40 mm should be provided with a chamfer to prevent moisture accumulation. This is not necessary for vertical placement. Ensure that the battens are placed 40 to 60 cm apart, depending on the degree of sun exposure on the facade. Each plank must have a starting and ending batten.

Approximately 7 stainless steel screws are needed per plank, which amounts to about 17 screws per m². A pack of 100 screws is sufficient for approximately 6 m² of cladding.

Product features:

• Stainless steel Torx 20 screw
• Self-drilling
• Size: 4.2 x 32 mm
• per 100 or 200 pieces